So after all the work I put into our blazer, and all the money we had to spend on it for random fixes left and right, enough is enough. The transmission starting going over the past couple weeks. From what I saw online, getting a flush would cause more harm than good, but just replacing the filter and a couple quarts of fluid shouldn't cause any problems. So I went to midas and paid them to replace the tranny filter and the fuel filter. They screwed up something by either hitting something too h
This service was done on 07-17-2010
The miles were at 4928 for it's first oil change and tire rotation! Because this is a new car I'm only going to use full synthetic oil for the life of the vehicle to make sure the engine lasts as long as possible.
The dealership also finished one more pedal recall that I wasn't aware of. He told me to disregard the letter I'll get in the mail this week because I'll already have it done.
On a side note, the discount card I bought at the dealershi
Heres a couple pics of me fixing my blazer's emergency brake yesterday. A stupid little clasp at the top of the ebrake held in with a phillips head screw (just underneath the top of the brake shoe) was bent back and the brake shoe was not flush against the back plate. It caused all kinds of popping, clicking sounds and vibration while I was driving. So to fix it I pushed the e-brake shoe flush against the back plate and pushed the metal piece back into place and tightened it up. While I was at i
I updated 4 different mods on the forum in preparation for the newest version of vB. I'm pretty forumed out at the moment. Maybe I'll make a new poll tomorrow or next week. blah.
Well, I drilled out a spot on the fender bar so I could attach a chain mount to it for a connection point for my tow strap hook.
Heres the hook attached to the chain mount:
Another angle:
Attached to a pine tree for an ancor support.
Pulling resulted in slight movement of the crumpled bar, before the metal started giving away on the chain mount.
So, I used a rubber mallet and started whacking it and hitting parts back into place.
Anothe
When I first got the blazer I had a huge number of issues with it, that thankfully, I was able to get fixed at the dealership for free within the first couple months of buying it. Of course there have been a variety of issues since then that I've had to take care of like a ball joint, alignment, oil leak, front and rear shocks, back brakes, front brakes.
At least I've been able to do the brake jobs myself, but just the other day my emergency/parking brakes seized up on my back rotors. F*ck
Today I put a small piece of cut fuel line over my existing fuel line with a hose clamp, I had it set just up from the leak so when I took off the old patch I would be able to quickly slide it down the fuel line and tighten it over the leak. Unlike when I first found the leak and quickly patched it up while sliding on top of snow and ice, I was able to put the truck up on my car ramps to get plenty of room to work with. Those ramps have paid for themselves already.
So after I had the new pa
Well, the latest vb update has screwed up our blog links in our profiles and I keep getting a db error message in the blog email system. *stabs vb* release a gold version already!
After my last attempt at straightening out that radiator support bar, I purchased a $10 nail puller that looks like a mini crow bar. It worked out great for fixing the rest of the crumpled metal because both ends were the perfect size to fit in the pre-existing drilled holes in the metal. So, using that and a rubber mallet I was able to whack most of the metal back into place. I also fixed up another spot to use my tow cable on and with chelle's help we were able to pop out a very crumpled part.
Aside from getting the right colored hood and a couple new fog light housing pieces (damn pieces holding the lights in place are busted up pretty bad), the car is done.
It passed the NY state inspection the other day and I've been driving it to work all last week. Check out the before and after pics:
So I finished up the front brake job with no real problem. The only thing I forgot to do was spray on some anti-squeal on the backs of the brake pads, but thats only because I didn't have any at the time. Anyway, the front brakes are good, but we've been getting some vibrations in the steering wheel and the ABS is randomly kicking on. So I decide to check out the back brakes again. Seeing as I paid Midas to do my back brakes about 6 months ago, I never really looked at the job all too carefully
I hate ads. But I also hate being strapped for cash and having an outstanding credit card debt because of continuous monthly charges. Of course I love having my websites, but at the time of the last server move we had hosting revenue coming in. So yeah, gotta supplement those bills somehow. At least we don't have to look at the ads while we're logged in. At least the majority of us.
*stabs economy*
My Saturn was in an accident almost 2 years ago with a SUV. The SUV hit the front right of my car, busted my flip up headlight and slightly crumpled the radiator support bar as seen in these pics. The left flip up headlight was destroyed a few days later at Sam Dell, the car dealership my insurance made me take my car to for a damage estimate.
The Sam Dell idiots ripped the good headlight off instead of taking it off to look at the bumper closer, which had no real damage. But because they a
Last weekend I heard a noise and I knew the end was coming for the car. The timing chain is going. It started making a slight noise months ago which is why I stopped driving it on the freeway... but now its so loud just idling I was able to take a video of it.
saturn_timing_chain
I haven't gotten a quote to replace the $35 part, but I know it will be huge because to replace the timing chain, you have to remove the engine and take apart half the engine. That would cost more than what th
The bleeding nut on the passenger side front caliper broke and so I replaced the caliper. Instead of just doing that side I felt it would be best if I replaced both calipers in the front and thats just what I did. $80 later for the calipers and a bit of work a week and half ago and the job was done. Bleeding the brake lines was time consuming, but after I got it done I took it over to midas and had them replace the fluid and re-bleed it all.
This past weekend screwed us. While driving down the road the Blazer died. It completely stalled out 5 minutes from the house. We had to get it towed. There was a fuel leak that had to be fixed and the spark plugs, wires, distributor cap all had to be replaced.
Please click the following link to browse all the entertainment reviews located in our archives:
http://www.ancientclan.org/reviews/entertainmentreviews.php
I took this video yesterday in the late afternoon. We have a family of wrens that like our bird seed and the babies are still too young to fear humans completely. I was about a foot away when I took this video.
wrenonbirdfeeder
The very next day after posting about the right side being almost done, I put the other headlight and turn signal on the left side. Since then I've put in quite a few more days and alot of hours into the car and now its pretty much done. All I had left was to bleed the brake lines. I bled the driver's side, then when I went to bleed the passenger side, the bleeder nut snapped off. x_x So I replaced the caliper and when I went to bleed the line, the hood latch release busted.
Anyway, even wi
I've been getting ready for spring for the last couple months and its taken up a crazy amount of my free time. We expanded our garden to be really huge last september in preparation for growing fruit and veggies. Then we decided to expand it another 6 more feet in one direction which we finally got finished last weekend. It was alot of work because our garden has an almost 6 foot tall deer fence all around it. We hammered in u-posts into the ground and attached the deer net and buried the bottom of the net so nothing will burrow under it. I should do measurements at some point to figure out its total volume. Its huge. lol.
We have 3 apple trees, 3 cherry trees, and 1 nectarine tree in there. We still have to move 3 of those trees into their permanent locations (they are only 1 or 2 year old trees so its still possible to dig them up) and we have to plant a new apricot tree in there. I prepped the two rows for veggies last month but theres alot of weed whacking to do still and plants to move. We have 4 grape vines, 4 blueberry bushes and multiple raspberry plants to move. I started a bunch of veggies from seed and those tomatoes are still in an unused bath tub in my house with a light over them getting bigger every day. I'm looking forward to getting everything planted and done so all this gardening can give me a break.
Well my dryer broke after about 15 years and multiple repairs I've done over those years. I had to buy a new dryer. So far so good. I was finally able to get my laundry done again and my bathroom no longer smells like dirty socks and febreeze.
FML my pressure tank is failing for my well. Its getting replaced next week. Getting a new whole house water filter installed too along with some new valves and safety upgrades. Props to the well company employee for giving me the tip of hooking up an air compressor to the pressure tank to put some air in the bladder to get the system gimping along until the repair work is done. I miss public water. lol.
This has been a busy summer. I'm almost looking forward to winter so I can get a break from all the lawn mowing and outside projects. Hopefully the snow blower I bought this year works good so I'll have alot of free time this winter to get caught up on things. When I've had free time I've been playing Final Fantasy X over the last 5 months and I've somehow finally hit 100 hours on it. Lol. Only took me about half a year. I still didn't beat it yet but I'm at the end game stuff now with the monster arena and omega ruins.
I've been getting ready for spring for the last couple months and its taken up a crazy amount of my free time. We expanded our garden to be really huge last september in preparation for growing fruit and veggies. Then we decided to expand it another 6 more feet in one direction which we finally got finished last weekend. It was alot of work because our garden has an almost 6 foot tall deer fence all around it. We hammered in u-posts into the ground and attached the deer net and buried the bottom of the net so nothing will burrow under it. I should do measurements at some point to figure out its total volume. Its huge. lol.· 0 replies
