Saturn radiator support bar
Well, I drilled out a spot on the fender bar so I could attach a chain mount to it for a connection point for my tow strap hook.
Heres the hook attached to the chain mount:
Another angle:
Attached to a pine tree for an ancor support.
Pulling resulted in slight movement of the crumpled bar, before the metal started giving away on the chain mount.
So, I used a rubber mallet and started whacking it and hitting parts back into place.
Another angle:
The hood does close a little more level now. I'm going to use a small pry bar and rubber mallet to try and straighten it out more. As long as I can get it straightened enough for my headlight to mount back in correctly, it'll be good enough.
0 Comments
Recommended Comments
There are no comments to display.